|
M8274-50 8,000 lb. Winch THIS
PAGE COVERS P/N 38631 & 37583
Serial numbers 344817 to 348068
(click here for serial numbers 348069 to 620867 )
(click here for serial numbers 620868 and
up)
Serial numbers 344817 to 348068
Click on the item number of the part you need to replace 
Service Kits:
Lower Housing Service Kit (includes items
26 thru 28 & 31) P/N
8680
Brake Service Kit (includes items 35, 36, 38, 39, 41, 42, 44, 45, 48 & 50)
P/N 8409
* Note: Due to technical assembly requirements, the upper housing
and cluster gears are not sold seperately.
M8274-50
Winch
P/N 38631 & 37583
Serial numbers 348069 to 620867
Click on the item number of the part you need to replace
Service Kits:
Lower Housing Service Kit (includes items
26 thru 28 & 31) P/N 8680
Brake Service Kit (includes items 35, 36, 38, 39, 41, 42, 44, 45,
48 & 50) P/N 8409
* Note: Due to technical assembly requirements,
the upper housing and cluster gears are not sold seperately.
M8274-50
Winch
P/N 38631 Serial numbers 620868 and up
Click on the item number of the part you need to replace
Service Kits:
Lower Housing Service Kit (includes items
26 thru 28 & 31) P/N 8680
Brake Service Kit (includes items 35, 36, 38, 39, 41, 42, 44, 45, 48 & 50)
P/N 8409
* Note: Due to technical assembly requirements,
the upper housing and cluster gears are not sold seperately.
NEW! WARN WINCH REMOTE CONTROL
INTUITIVE FEATURES IN THE PALM OF YOUR HAND |
Welcome to the next generation of winch remote controls. The new WARN remote incorporates an improved ergonomic design and intuitive features that help operators better navigate through winching operations.
WARN S2 (Smart Sense) elements, such as an instinctive rocker switch with an elevated dimple on Power-Out and a recessed dimple on Power-In, and a high-impact polymer grip allow operators to pay more attention to the winching situation rather than the remote. By using the sense of feel, rather than sight, operators can confirm the winch line's direction without relying on the visual cues on the remote handle.
PN 72566 and PN 72568 also contain a high-intensity LED flashlight in the bottom of the handle for extra visibility in hard-to-see applications.
An increased control surface area on the remote allows for easy use while wearing gloves.
|
*WARN WIRELESS CONTROL SYSTEM
CONTROL YOUR WINCH WITH NO STRINGS (OR WIRES) ATTACHED. |
 The WARN Wireless Control System lets you
operate your truck's winch remotely from
up to 100' away. The system will work with
any WARN winch with a 5-wire electrical
system.
The system is easy to install and a cinch to use. For
easy installation, the Wireless Control System comes
with a receiver with an internal antenna, and all of the
necessary mounting hardware. The receiver is potted for
extreme resistance to water and the elements. The
weather-proof transmitter has two large buttons that make it
easy to operate, even while wearing gloves, and its two-color LED provides operator feedback.
When installed, the system is simple to operate. To begin activation, hold down both buttons on the transmitter for five seconds until the two-color LED turns green. This indicates the system has been activated. To begin the winching process, hold down the power-in or power-out buttons, and the LED will turn red, showing that winching is in process. The LED will blink if the transmitter's battery is low. System automatically turns off to conserve battery life.
With the WARN Wireless Control System, you can now operate your winch with no strings (or wires) attached.
PN 76080 Wireless Control System for WARN Truck/SUV winches |
|
